company profile
chinese
Saws
Planer
Rotary composer/Finger Jointers
Spreader
Routers/Spindle Shapers/Copy Shapers
* Routers
* Spindle Shaper
* Copy Shaper
Tenoners
Back Knife Lathes
Sanders
* Profile Sanding Machine
* Chair Series
* Furniture Series
* Wide Belt Sander
* Polish Series
* Tube Series
Boring Machines
Edge Banding Machines
Knife Grinders
Dust Collectors
Feeders
Cold & Hot Press Machines
Coating Equipment
Whole Plant Machineries Planning and Manufacturing
Bamboo Flooring/ Bamadoo Paneling
Accessories
   
> Sanders > Profile Sanding Machine >Mechanism description
   
 
Standard fence
The standard of fence is design for feeding the working piece stably.
Manual pusher
The feeding system configure with the manual pusher to avoid any hazard while in operation.
Special fence
The fence of rollers is special design. It using for feed the small width of product and the special material product.
Special fence
The fence of rollers is special design for feeding the special product.
 
The cutting head with jumping
They are 2 sets of cutting head. They both configure with floating and jump function for accurate cutting effect.
The cutting head with floating The head is industrial cutting head. It has equipped the floating and
copy function, driven power 7.5HP (optional 10HP) and the angle of the head can fine-tuned the vertical angle.
Cammercial type of cutting head
This is commercial type of cutting head, the angle can fine tune adjustment.
The positioner of air cylinder
This is industrial cutting head. The vertical adjustment using the six speeds by air
cylinder, the motor using server motor, using selector switches for easy replace the cutter.
 
The triangular belt head(slant ) and The cutting head
This is the slant type of triangular belt
head. It is suitable the small area of working piece. The slant type of design will consume all of sand belt.
The triangular belt head (Top slant type)
This is the slant type of triangular belt head. It is suitable
the small area of working piece. The design of head can tune to sand the top surface of product.
The triangular belt head (The underneath slant type)
This is the slant type of triangular belt head.
It is suitable the small area of working piece. The design of head can tune to the top surface of product for sandingproduct.
The triangular belt head and wheel head
This is the structure of single side profile sanding machine. It configure with the triangular belt head and the wheel head.
 
The triangular belt head (Up / Down)
This is industrial triangular belt head. The top and underneath of sanding base, they own the individual angle adjuster.
The triangular belt head (Up / Down)
This is industrial triangular belt head. The top and underneath of sanding base, the angle adjustment using the gear.
Wheel head (UP / Down)
The head is industrial wheel head. Using the angle adjuster to adjust the angle of head. The scale will show the angle position.
Wheel head (UP / Down)
The head is the industrial wheel head. Using the gear to adjust the angle of wheel head. The data will show on the digital read out.
     
Air cylinder of disc sanding head
Air cylinder of disc sanding head is suitable the accurate sanding jobs. Suitable product:plastic & primer paint & specific material.
The feeding system
The structure configures with top pressure belt and feed pad to strengthen feed capability. The press base adjusts using electrical controller.
   
back