 |
| features: |
 |
Exclusive panel pressure device
The panel pressure device is specially designed to handle small pieces of stock. It requires no blower, saving space and cost. |
|
Simultaneous Longitudinal and cross sanding
The advance design consists of 2 reversible crosswise spindles and 4-5 short longitudinal spindles to make reversible running and reciprocating movement. This permits cross and longitudinal sanding to be performed simultaneously. Any types of irregular surfaces can be sanded easily and quickly. |
|
Convenient sanding belt replacement
Simple loosentwo screws,and the sanding belt can be conveniently and quickly replaced. No dismantling of bearings is necessary. |
|
Precision Ball Screws
The conveyor table is supported by precision ball screws, providing extremely smooth and accurate table elevation. |
|
|
| |
 |
| |
Special design for alterable parts of the brush.
 |
| |
 |
 |
H Type
Suited for more irregular surfaces with less surface sanding. |
 |
 |
HB Type
Suited for complicated irregular surface with surface sanding. |
 |
 |
HBE Type
Suited for simple irregular surfaces with more surface sanding. |
| Various sanding head configurations for choice |
 |
 |
 |
|
|
| |
|
|
|
|
| Quick replace sanding belt device. |
Hand-adjustable with micro-adyustment. |
Pressure gauge(can control from the machine front and rear are both setting pressure gaugets) |
Body activated emergency stop bar. |
|
|
|
|
| Emerbency switch on the machines rear.(the emergency to stop working decision depend on rear operater. It can decrease lose when improper control.) |
Control panel(include computer elevation controller ,except H series). |
Disc braking mechanism. |
Variable speed feed rate. |
|
| |
| Description : |
| MODEL |
GB-1000 H |
GB-1000 HB |
GB-1000 HBE |
| Max.working width(mm) |
900 |
900 |
900 |
| Max.working thickness(mm) |
150 |
150 |
150 |
| Main motor |
- |
15HP |
15HP |
| Sanding belt size |
- |
37"x75" |
37"x75" |
| Lateral spindle motors |
2 HP x2 |
2 HP x2 |
2 HP x2 |
| Vertical spindle motors |
1/2 HPx4 |
1/2 HPx4 |
- |
| Feed motor |
2HP |
2HP |
2HP |
| Brush motor |
- |
1/2HP |
1/2HP |
| Table hoist motor |
1/2HP |
1/2HP |
1/2HP |
| Feed speed range (M/min) |
3-12±5% M/min |
3-12±5% M/min |
3-12±5% M/min |
| Diameter of sand brush (mm) |
305 |
305 |
305 |
| Working pressure (kg/cm2) |
7kg/cm2 |
7kg/cm2 |
7kg/cm2 |
| Machine size (cm) |
280 x 220 x 166 cm |
315 x 220 x 203 cm |
275 x 220x 203 cm |
| Packing size (cm) |
285 x 225 x 188 cm |
318 x 225 x 223 cm |
278 x 225 x 223 cm |
| Net weight / Gross weight |
2280 / 2470 kgs |
3400 / 4000 kgs |
3100 / 3600 kgs |
|
|
| |
