company profile
chinese
Saws
Planer
Rotary composer/Finger Jointers
Spreader
Routers/Spindle Shapers/Copy Shapers
* Routers
 * Spindle Shaper
 * Copy Shaper
Tenoners
Back Knife Lathes
Sanders
* Profile Sanding Machine
* Chair Series
* Furniture Series
* Wide Belt Sander
 * Polish Series
 * Tube Series
Boring Machines
Edge Banding Machines
Knife Grinders
Dust Collectors
Feeders
Cold & Hot Press Machines
Coating Equipment
Whole Plant Machineries Planning and Manufacturing
Bamboo Flooring/ Bamadoo Paneling
Accessories
   
> Saws > Auto Cut-off Saw > SM-200

SM-200 Semi-Optimizing Cut-Off Saw   

The User-friendly Optimizing Saw Enables Amazingly High Productivity.

SEMI - OPTIMIZING CUT-OFF SAW
Ideal for finger jointing (for defect) materials and mass material preparation.
Provides 3 ~ 5 times higher production rate than manual cut-off saws. Saves over 5% of wood materials.
Comprehensive safety guards for maximum operator protection.
Compact and user-friendly design.
The controller adopts an industrial-grade computer that employs a 32-bit floating-point DSP system. It features flash and battery backup SRAM for double security. Superior to conventional PC-based controls, it can fully eliminate the machine going down or being damaged due to a poor environment, such as, unstable voltage, high temperature, sawdust, etc.
The computer control provides easy and fast maintenance.
Feed is driven by a servomotor for fast and accurate motions.


CONSTRUCTION & FEATURES :

  1. Maximum feed speed is up to 140 M/min.
  2. Cutting rate up to 120 cuts per minute.
  3. 2 meter long stock is quickly cut into 10 pieces in only 8 seconds (max. feed speed).
  4. 4 meter long stock is also quickly cut into 10 pieces in only 10 seconds (max. feed speed).
  5. High cutting accuracy within mm.
  6. The control employs a touch screen for easy learning and operation.
  7. All new machine design features maximum maintenance convenience.
  8. High quality electric parts provide maximum dependability.

 

Fix length of cutting mode.

Sequential cutting mode.

*10 sets of cutting sizes memory (for sequential cutting mode only).

Marking lines cutting mode.
Marking lines cutting mode and fix length cutting mode.


CUTTING RANGE DIAGRAM:

Remaining material is cut to the optimized length according to various setting lengths.

SPECIFICATIONS:

Model

SM-200

Saw motor

10HP

Saw spindle speed 50HZ

3,300R.P.M.

Saw spindle speed 60HZ

3,200R.P.M.

Max. feed speed

Variable to 150 M/min(450 ft/min)

Circular saw diameter

Ø455mm(18")

Saw spindle diameter

30mm

Minimum distance of marks

20mm

Cutting size

See the diagram of cutting range

Air pressure

5-6kg/cm2

Machine weight

1250kgs(2750 lbs)

Machine dimensions(L x W x H)

1273 x 1450 x 1460mm (W/ O roller table)