Chin Chao Sheng Machinery Co., Ltd.

LVGS-9 Spreader


	Glue spreader is used for spreading glue uniformly on veneers. Uniform gluing with the exact amount of adhesives improves the quality of plywood and saves a huge amount of expense in the long run.
	The clearance between the glue rolls and the doctor roll, in which a stepless change in rotation is available, can be freely adjusted according to the viscosity and the amount of glue to be spread.
	The waste scrape the glue roll. When it insert to the clearance either between the glue rolls；or between the glue roll and the doctor roll, the rolls are separate quickly by air cylinder. So the waste fall down and can not scrape the glue roll.
	This m/c uses a stepless morda inverter in model, it can control efficiently the stabifity of running motor and the horse power of the output. Af the operation the exchanged velocity. It can adjust easily the needed gluing velocity according to the actual gluing situation.(Nonstep speed change).
	Besides, the machine is specially equipped with an emergency stop switch can immediately stop the running machine in emergency conditions. The operator can activate the emergency stop switch within a very short time to ensure the safety of the operator.

Specifications :

MODEL	LVGS-9
Main rubber rolls	350O x 2730x 2 SETS
Doctor rolls	230O x2730 x 2 SETS
Clearance between Rubber rolls	0~55 By handle
Adjustment of doctor rolls	One touch control by pneumatic system & fine adyustment by handle with revolution indicator.
Feed speed(Stepless inverter)	0~120HZ(230M/MIN)
Outfeed Speed	96M/MIN
For Outfeed Conveyor	1.5KWx4P
For Main motor for rolls drive	5.5KWx4P
Machine dimension	1010(W)x4225(L)x1700(H)mm
Machine weight(opprox)	4,250kgs
Optional Accessories: Air Compressor with 2.2kw motor (required 5kg/cm2 pressure air, 200 L/min,freeair)