GB-1280PA4C4T-R
Inquiry
PREV
- Features
- Description
- Specifications
- 1. Four-sided profile sanding and polishing architecture.
- 2. Modular processing stations configured strictly according to workpiece profiles.
- 3. Compatible processing units: cutterheads, sanding belts, grinding wheels, chamfering cutters, staining stations, roller coaters, and UV curing lamps.
- 4. Station control options: Variable Frequency Drives (VFD) or centralized Programmable Logic Controller (PLC) integration.
- 5. Hardware configuration, including the Type-D baseline structural framework, is modularly scalable based on defined budgetary parameters.
- This series of machines features a four-sided profile sanding and polishing architecture. The system utilizes modular stations configured according to the specific exterior dimensions of the workpiece. It supports the integration of various functional modules, including cutting, sanding, coating, and UV curing units. Operational control is managed via individual VFDs or a centralized PLC system. The equipment specifications are highly modular, allowing for adjustments in hardware components or the adoption of a Type-D baseline structural framework to align with specific technical and budgetary constraints.
| MODEL | GB-1280PA4C4T-R |
| Feed automatic device (R) | |
| Feed length | 2.5m |
| Feed width | 250 mm |
| Feed motor | 5 HP Feed motor controlled by inverter 5 HP x 1PC |
| Max. Feed speed | 60 m/min |
| Mechanical base | |
| The range of work-piece width | 40-250 mm |
| The range of work-piece thickness | 5-100 mm |
| The range of work-piece length | 550 mm |
| 1st-4th position:Cutting motor | 7.5 HP x 4 sets (High frequency motor) |
| Cutting motor controlled | by inverter 7.5HP x 4 pcs |
| Max. Cutting speed | 12000 R.P.M |
| 5th-10th position | |
| Triangle belt set | 6 sets |
| Belt motor | 3 HP x 6 pcs |
| Belt motor controlled | by inverter 3HP x 6pcs Max |
| Belt speed | 4800 R.P.M |
| 11th-16th Position | |
| Triangle belt set | 6 sets |
| Belt motor | 3 HP x 6 pcs |
| Belt inverter | TE inverter x 6 pcs |
| Max. Belt speed | 4800 R.P.M |
| 17th-20th Position | |
| Wheel head | 4 sets |
| Wheel motor | 3 HP x 4 pcs |
| Wheel motor controlled | by inverter |
| Wheel speed | 2500 R.P.M |
| The head configuration for diamond grinding wheel x 4pcs | |
| Feed motors | 1 HP |
| Feeding speed | by inverter (Variable) 60 m/min |
| Feed-out length is 2.5 | |