Inquiry
PREV
- Product Description
- Product Specifications
- Video
- Advanced synthetic resin matrix maintains profile integrity throughout wheel lifecycle
- Application-specific grit selection (coarser for hardwoods, finer for resinous woods)
- Recommended dual-stage setup (calibration + micro-finishing) for heavy imperfections
- Tightly bound matrix yields finish ~50% finer than coated abrasives (Grit 100 wheel ≈ Grit 150 belt)
- Synchronized thermal management at 800-1,450 RPM prevents scorching
- Advanced Synthetic Resin Matrix: The hard-bonded structure ensures absolute profile integrity. While initial custom shaping requires dedicated dressing systems, the configured profile remains strictly unaltered throughout the wheel's entire lifecycle, minimizing downtime for reshaping.
- Application-Specific Configuration: Grit selection must align with material density (coarser for hardwoods, finer for resinous woods). For heavy imperfections or extreme hardness, we strongly recommend a dual-stage setup: integrating a primary calibration wheel followed by a micro-finishing wheel.
- Enhanced Grit Equivalence: The tightly bound abrasive matrix yields a finish approximately 50% finer than standard coated abrasives (e.g., A Grit 100 wheel produces a finish equivalent to a Grit 150 abrasive belt).
- :Synchronized Thermal Management:: To strictly prevent surface scorching, spindle speeds (800 – 1,450 RPM) must be precisely synchronized with a continuous, proportional feed rate.
- High-Density Wood Profiler
- Engineered specifically for high-hardness and dense solid woods (e.g., Beech, Oak, Meranti). Provides aggressive abrasive action without rapid wheel degradation or profile distortion.
| TYPE | WHEEL SPEED RPM FEED SPEED METERS PER MINUTE ELECTRONIC COMPANSATION TIME |
| CL | 1500 min. 15 m/minute 100" – 120" |
| CLR | 1500 min. 15 m/minute 120" – 180" |