GB-750J, GB-700A
Inquiry
PREV
- Features
- Description
- Specifications
- Edge banding and gluing capabilities.
- Compatible with both flat and beveled edge profiles.
- Standardizes edge finishing output.
- Establishes fixed operational processing cycles.
- This machine series is engineered for the edge banding and gluing of kitchen cabinet doors. The hardware architecture is compatible with materials such as acrylic and crystal boards, and is configured to process both flat and beveled edge profiles. The equipment standardizes the edge finishing procedure, ensuring measurable output specifications and fixed operational cycles.
| Workpiece length | 160mm~up | |
| Workpiece width | 70mm~up | |
| Workpiece thickness on vertical | 10~45mm | |
| Workpiece thickness on tilting | 15~25mm | |
| Air pressure required | 6kg/c㎡ | |
| Banding material thickness | 0.4~2mm | |
| Working configuration | ||
| Tilting surface forming | 3.75kw x 1 unit at 3000rpm (50HZ) | |
| Pre. fine trimming system | (variable via inverter; high frequency motor) | |
| Pre. fine trimming system motor | 0.55kw x 1 unit (Small saw) 0.85kw x 1 unit (Large saw) |
|
| Pre. fine trimming system accesories | *equipped with ø 85mm diamond tipped sawblade (1 unit) *equipped with ø 150mm diamond-tipped sawblade (1 unit) |
|
| Quick glue dispenser with nozzle and roller system | ||
| Vertical side gluing | 1 unit | |
| Tilting side gluing | 1 unit | |
| Gluing feed motor | 0.19 kw x 1 unit | |
| Banding material grooving | 0.35kw x 1 unit (variable via inverter; high frequency motor) | |
| Catalyst coating system | ||
| *equipped with banding catalyst applicator (1 unit) | ||
| equipped with catalyst mist spray (2 units) | ||
| Edge pressure rubber belt press motor: | 0.19kw x 1 unit | |
| Banding feed motor | 0.19kw x 1 unit | |
| Hot air gun | 2.2kw x 2 units | |
| Front / back trimming system: | 0.35kw x 2 units at 12000rpm (variable via inverter; high frequency motor) |
|
| Top / bottom trimming system | 0.55kw x 2 units at 12000rpm (variable via inverter; high frequency motor) |
|
| *equipped with straight knife plaining cutterhead (2 units) | ||
| *equipped with straight knife plaining cutterhead (2 units) | ||
| Top / bottom chamfering system | 0.55kw x 2 units at 12000rpm (variable via inverter; high frequency motor) |
|
| chamfer 1.5R *equipped with 1.5R chamfering cutterhead (2 units) |
||
| Front / back chamfering system | (variable via inverter; high frequency motor) 0.35kw x 2 units at 12000rpm |
|
| equipped with 1.5R chamfering cutterhead | chamfer 1.5R 2 unit |
|
| Feed motor / Feeding speed | 3.75kw 5~11 m/min |
|
| Pressure beam elevation motor | 0.19kw | |
| Total horsepower | 18.01kw | |
| Net weight | 3100kgs | |
| Gross weight | 3600kgs | |
| Machine dimensions | 10000x1400x1540mm | |
| Packing dimensions | 10010x1160x1820mm | |