GB-280PA1FS
Inquiry
PREV
- Product Description
- Product Specifications
- The head is industrial cutting head. It has equipped the floating and copy function, driven power 7.5HP (optional 10HP) and the angle of the head can fine-tuned the vertical angle.
- The triangular belt head (Down/Up)
The head is the Industrial triangular belt head (80). The abrasive belt configure with oscillating device and air jet clean device. (Down to side ) The head tilts 20 up to -90 degree.(UP to side) The head tilts -20 up to 90 degree. - The head is Industrial triangular belt head (80). Manual control panel is easy operation. The speed of abrasive belt and the tension of abrasive, they are design for easy adjustment.
- The industrial wheel head (A) with auto compensation device, the range of angle adjustment is 110 degree.
- All motors and reducers are manufactured in Taiwan's ISO factory and are of consistent quality.
- The machine frame is welded from rigid thick gauge steel plate, ruggedly constructed and precision machined for superior sanding accuracy and long service life.
| MODEL | GB-280PA1FS |
| Max. work-piece width | 1500mm |
| Max. work-piece height | 100mm |
| Min. work-piece length | 200mm |
| (80) Sanding belt | 1 set |
| Motor drive of (80) sanding belt | 2HP x 2 set |
| Sanding belt size | 4" x 98" x 2 set |
| Sanding belt equipped with automatic Air jet blow dust device | |
| Sanding belt with oscillation device | |
| Oscillation driven motor | 40W x 1/ 50 x 2 set |
| Sanding belt speed control | By variable speed of frequency inverter |
| (A) Sanding wheel | 1 set |
| Motor drive of (A) sanding wheel | 2HP x 1 set |
| Sanding wheel equipped with automatic compensation device | |
| Automatic compensation driven motor | 25W x 1/ 180 x 1 set |
| Sanding wheel speed control | By variable speed of frequency inverter |
| Feed speed control | 3-25m/ min, By variable speed of frequency inverter |
| Top pressure feeding rollers with spring loaded | flexible adjust roller pressure and belt conveyor transmit work-piece compactly. |
| Sensor control system | Avoid work-piece un-sanded or over bevel the end of work-piece. |
| Feeding motor | 3HP |