GB-A2FC2S
Inquiry
PREV
- Product Description
- Product Specifications
- The head is industrial cutting head. It has equipped the floating and copy function, driven power 7.5HP (optional 10HP) and the angle of the head can fine-tuned the vertical angle.
- The triangular belt head (Down/Up)
The head is the Industrial triangular belt head (80). The abrasive belt configure with oscillating device and air jet clean device. (Down to side ) The head tilts 20 up to -90 degree.(UP to side) The head tilts -20 up to 90 degree. - The head is Industrial triangular belt head (80). Manual control panel is easy operation. The speed of abrasive belt and the tension of abrasive, they are design for easy adjustment.
- The industrial wheel head (A) with auto compensation device, the range of angle adjustment is 110 degree.
- All motors and reducers are manufactured in Taiwan's ISO factory and are of consistent quality.
- The machine frame is welded from rigid thick gauge steel plate, ruggedly constructed and precision machined for superior sanding accuracy and long service life.
| MODEL | GB-A2FC2S |
| The range of workpiece width | 100-1500mm |
| The range of workpiece height | 5-100mm |
| Min. workpiece length | 150mm (100mm) |
| (A) Sanding wheel | 2 sets |
| Motor drive of (A) sanding wheel | 2HP x 2 sets |
| (A) Sanding wheel unit can adjustment height and traverse and tilting | |
| (F) Sanding wheel equipped with automatic compensation device | |
| Automatic compensation driven motor | 25W x 1/ 180 |
| Sanding wheel speed control | By variable speed of frequency inverter |
| (C) Moulding head | 2 sets |
| Motor drive of (C) Moulding head | 7-1/2HP x 2 sets |
| Moulding head can adjustment height and traverse | |
| Moulding speed | 6000-7800 RPM |
| *** First cuttiner head configure with Jump Function. *** | |
| Feed speed control | 3-30m/ min, By variable speed of frequency inverter |
| Feed motor | 5HP |